TOM-001                VIBRATION LAB EQUIPMENTS                                       

 

                        a.         Pendulum Experiments :

                                    i.          Simple Pendulum.

                                    ii.         Compound Pendulum.

                                    iii.        Bi-filler Suspension.

 

                        b.         Longitudinal Vibration Experiment.

                                    i.          Spring Mass System.

                                    ii.         Equivalent Spring Mass system for study of 
                       undamped free vibration.

 

                        c.         Torsional Vibration Experiment. 

                                    i.          Single Rotor System.

                                    ii.         Two Rotor System.

                                    iii.        Single Rotor with viscous damping.

 

                        d.         Damped Vibration Experiment.                   

                                    i.          Verification of Dukerleys Rule.

                                    ii.          Forced   rotor   with   viscous   damping   
                        along with frictional HP Motor Strip chart 
                        recorder & control unit.

                       e.        Digital RPM & frequency Indicator  with sensora

 

TOM-002                WHIRLING OF SHAFT APPARATUS                     

 

                                    The apparatus consists of :

                        a.         Shaft of steel having dia. 3/16 “ , 1/4” & 5/16” & length 36 “.

                        b.         Kinematic Coupling & Bearing.

                        c.         Sliding Chuck.

                        d.         Electric Motor ( Frictional HP) 4000 RPM.

                        e.         Dimmerstat to Control Motor Speed.

 

TOM-003                MOTORISED GYROSCOPE                                           

 

                        The equipment consists of rotary   disc     precisely     balanced     which     can   be   rotated   in    3 mutually perpendicular   axis   coupled with stepless variable, speed motor of STD make  Supported in   ball   bearing    with loading arrangements.  Accurately   marked   scale   &   pointer to measure precession rate.

 

TOM-004                STATIC & DYNAMIC BALANCING APPARATUS    

 

                        This   apparatus  consists of a perfectly balanced steel shaft mounted  in 
                        ball bearings in a rigid rectangular frame.  A set of   four balancing blocks 
                        of different weights are provided & a   appositive split clamp arrangement 
                        allows then to be easily   fixed   in any position along the shaft.  Each block 
                        is specially   designed  so that its turning moments about one of the shaft.

 

TOM-005                UNIVERSAL GOVERNOR APPARATUS                    

 

                        With variable speed motor of STD make to draw speed Vs lift characteristics for rising & falling load.  It consists of different governor mechanisms with necessary springs & weighing like watt. porter, hartnele, accurately engraved scale fixed to apparatus for measuring sleeve movement & radius of governor.

 

TOM-006                VIBRATION MEASUREMENT

 

                   a. Vibration Measurement using Accelerometer
i. Accelerometer ( Piezoelectric Type )
   U.S.A. Make ( Model S.I. 120B )
ii. Vibration Indicator : Model S.I. 12
iii. Active Fitter : Model S.I. 17
iv. Magnetic Mounting Base                                            

 

                   b. Vibration Measurement Using Electrodynamics Type Pickup.
i. Vibration Sensor S.I. 100
ii. Vibration Indicator Model S.I. 10
iii. Vibration Exciter.
iv. Power Oscillator.                               

 

                    c. Vibration Measurement by Dual Trace Digital storage Oscilloscope. 

 

TOM-007                STRAIN MEASUREMENT

 

                        a. Strain measurement with the help of resistance wire strain gauges mounted on
   a contilever beam.

Accessories include a cantilever beam mounted with strain gauges, weights,
microvoltmeter & null   balancing arrangement for the bridge circuit.
b.
  i. Digital strain Indicator 3.5 L.C.
 ii. 10 Channel bridge balancing & switching unit Model SI -32.
iii. 10 Channel bridge balancing & switching unit & Amplifier Model SI - 32.
iv. Carrier Frequency Amplifier
v. Cantilever Jig
vi. Striangauge Kit

 

TOM-008                LOAD MEASUREMENT                                        

 

                                    a. Load Cells.
                i. 2 Kg.
                ii. 20 Kg.
                iii. 50 Kg.
                iv. 100 Kg.
                v. 1 Tone                                                                        

 

                        b.         5 Channel Digital Load Indicator 3.5 digit display.

 

TOM-009                PRESSURE MEASUREMENT

 

                        a. Pressure Transducers
    Range  :  
      i.   0 - 1Kg/Cm²
     ii. 0 - 2 Kg/Cm²
     iii.  0 - 10 Kg/Cm²
    vi.  0 - 20Kg/Cm²
    v.  0 - 50Kg/Cm²
    vi. 0 - 100 Kg/Cm²
     vii. 0 - 1 Tonne

 

                        b. 5 Channel Digital Load Indicator 3.5 digit display.

 

TOM-010                DISPLACEMENT MEASUREMENT

 

                    a. Displacement Transducers :
         Range :
                i.  ± 2 mm
               ii.  ± 5 mm
              iii.  ± 10 mm
              iv.  ± 20 mm
              v.  ± 50 mm
b. 5 Channel Digital Displacement Indicator with 3.5 digital display
c. Displacement sensor calibration Jig micrometer head with 10 micron count
d. L. V. D. T with Indicator
  

TOM-011                MACHINE TOOLS DYNAMOMETERS

 

                        a. Lathe Tool Dynamometers
b. Drill Tool Dynamometer
c. Surface Grinding Dynamometer
d. Milling Dynamometer
e. Digital Force Indicator for above
  

TOM-012                FOUR BAR LINK MECHANISM                                  

 

                        The apparatus consists of following :
These   are   mounted on a well polished wooden board angular & Linear
scales are provided to find  the displacement of points in the links.
a. Locomotive Coupling Rod Mechanism.
b. Ackerman Steering Gear Mechanism
  

TOM-013                RECIPROCATING ENGINE MECHANISM                   

 

TOM-014                OSCILLATING CYLINDER MECHANISM                    

 

TOM-015                WHITWORTH’S QUICK RETURN MECHANISM                  

 

TOM-016                CRANK & SLOTTED LEVER ARM MECHANISM.       

 

TOM-017                OLDHAMS COUPLING                                                       

 

TOM-018                UNIVERSAL COUPLING                                           

 

TOM-019                CAMS & FOLLOWER

 

                        a. Plate or Disc Cam with flat faced reciprocating follower.
b. Tangent Cam with roller Oscillating follower
c. Cylinder Cam with reciprocating follower
d. Translating Cam with Reciprocating Follower
e. End Cam with Translating Follower
f. Tri Cloven Heat Cam
g. Triangular Eccentric Cam                                                     

 

TOM-020                CENTRIFUGAL CLUTCH                                           

 

TOM-021                CONICAL FRICTION CLUTCH                                   

 

TOM-022                DOUBLE SHOE BRAKE                                            

 

TOM-023                BAND BRAKE                                                           

 

TOM-024                ROPE BRAKE DYNAMOMETER(15 HP)                    

 

TOM-025                CHAIN DRIVE                                                                

 

TOM-026                KINEMATIC PAIRS                                                    

 

                        Power & higher pairs are suitable mounted on the board. Power pairs of
turning , sliding, screw, spherical type are displayed   on  the board gear
wheels, cam & follower pair, ball  bearing are the items displayed as higher
pairs.  It also indicates various types of links such as flexible & rigid.
   

TOM-027                SINGLE PLATE CLUTCH                                          

 

TOM-028                INTERNAL EXPANDING BRAKE                               

 

TOM-029                KINEMATICS OF GEAR                                                      

 

TOM-030                APPARATUS FOR GENERATION OF GEAR

                                 TOOTH PROFILE BY USE OF RACK & PINION

                                  CUTTER                                                                        

 

                        The  apparatus consists of the process of cutting of involutes gear   tooth   by  use of rack type cutter.  It consists of three polystyrene   discs   A.B.C.   having pitch circle dia. 450mm, 300   mm, 200 mm.  A gear tooth profile with M = 1” can be traced   out   on   a piece of paper placed between disc & cutter.    An   effect  of interface & under cutting on correct profile of gear tooth can be studied from the profiles traced.  Beard size 3’ x 2/2’ approx.

 

TOM-031                CAM ANALYSIS MACHINE                                        

 

                        The machine consists of variable speed D.C. Motor drivers the rotor by that cams.  Three different types of cams with dial gauge are provided variable speed arrangement done by dimmerstat.