Fuel and Lubricants Laboratory, Fuel and Lubricants Lab, Mass Transfer Lab, Instrumentation Lab, Material Handling Lab, Momentum Transfer Lab, Non- Conventional Energy Sources, India

FLASH POINT GROUP.

FAL-001 PENSKY-MARTENE FLASH POINT APPARATUS

Closed cup as per IP:34, IS:1448 ( P-21 ) & ASTMD-93

electrically heated model with energy regulator control

( in built ) but with thermometer.

Closed cup as per IP:34, IS:1448 ( P-21 ) & ASTMD-93

electrically heated model with energy regulator control
( in built ) but with thermometer but with controlled by voltage
variac copper coil type ( Auto Transformer ).

Motorised Stirrer for above, if required.

Chip for open flash point as per IP:35 & IS:1448.

Reducing Socket with Cock & Y

Sphere Cup for above

Spare Y for above

FAL-002 ABEL FLASH POINT APPARATUS.

As per IP:33/59, IP:170/59, IS:1448, ( P-20 ) ( with thermometer)

Electrically heated model with energy regulator control.

As per IP:33/59, IP:170/59, IS:1448, ( P-20 ) ( with thermometer)

Electrically heated model with energy regulator control but controlled by voltage Varian copper coil type ( Auto Transformer )

Thermometer for oil bath as per IS/IP specifications.

Thermometer for water bath as per IS/IP specifications

Reducing socket for cock for gas test flame.

Space cup for above

Spare heating element for above

FAL-003 VISCOSITY GROUP

Kinematic viscometer bath rectangular as per IP:71,IS:1488, for

6 Nos. U tube viscometer temperature 120 + 0.1 C, controlled by German Contact Thermometer & electronic relay, outer casing made of M.S. Sheet painted with hammer stone paint. Interior brass chromium plated, supplied without viscometer holders.
Kinematic viscometer bath rectangular as per IP:71,IS:1488, for 6 Nos. U tube viscometer temperature 120 + 0.1 C, controlled by German Contact Thermometer
& electronic relay, outer casing made of M.S. Sheet painted with hammer stone paint. Interior brass chromium plated, supplied without viscometer holders but fully solid Digital display.

N.B. : It interior S.S. would be charged extra.

Accessories :

a. Universal Viscometer Holder.

b. Glass U Tube Viscometer ( Ostwald )

Our single bulb work certificate for above ( Calibrated at 100

F to 40 C. )

Silicon Okl ( Heat Transfer )

N.B. : Round glass jar bath can also be offered.

FAL-004 REDWOOD VISCOMETER

Redwood Viscometer No. 1 ( thermometer ) Electrically heated model as per
I.P.: 70 with S.S. Jet & energy regulator control ( Viscosity below 2000 second ).

Spare Redwood Flask.

Spare Heater.

Spare Heater but No. 2.

FAL-005 ENGLER VISCOMETER

Engler viscometer electrically heated model as per IP:212, ASMTD:490 & BS:434
with energy regulator control.

Spare Heater.

Spare Engler Flask

N.B. Extra For gold plated Cup is required.

FAL-006 SAY-BOLT VISCOMETER

a. Say bolt Viscometer as per ASTMD:88 electrically heated
model with energy regulator control with universal & furol jets made of 18/8 S.S.
without thermometer, strainer, withdrawal tube.

b. Say bolt Viscometer as per ASTMD:88 electrically heated
model with energy regulator control with universal & furol jets made of 18/8 S.S.
without thermometer, strainer, withdrawal tube but 2 test unit.

c. Say bolt Viscometer as per ASTMD:88 electrically heated
model with energy regulator control with universal & furol jets made
of 18/8 S.S. without thermometer, strainer, withdrawal tube but with 4 test unit.

Spare Saybolt Flask Cap 60 C.C.

Spare Heater.

Spare Jet ( Any )

Strainer for filtering oil

Withdrawal tube glass.

Withdrawal tube but metallic.

N.B. : Gas heated model can also be supplied
Saybolt bath 4 test as per FISCHER DESIGN first time
introduced in India.

a. Zahn Cut Viscometer No 1/2/3/4/5

b. Michels falling sphere viscometer.

ENGINE OIL LAB :

a. To test on site viscosity water content, total Base number, disperrancy etc.

b. Visgage No. 1 to measure viscosity of lubricating oil on site ( Portable model ).

c. Visgage No. 1 to measure viscosity of lubricating oil on site
( Portable model ) but No 2 for diesel Viscosity.

d. Furnance Oil Viscosity gauge ( Model 1 ).

e. Furnace Oil Viscosity gauge but for LSHS/HPS/RFO(Model 2).

FAL-007 RAMSBOTTOM CARBON RESIDUE APPARATUS.

Ramsbottom Carbon Apparatus as per IP:14 ( P-8 ) & ASTMD:524, with Poropmeter & control with 6 Nos. cocking bulbs & 1 No. syringe but
without tongs.

a. Round bath 14” dia. 10” ht with copper coil voltage varrier &

pyrometer.

b. Compact bath in one unit : 8 Amp electronic voltage varrier &

pyrometer.

c. Compact bath in one unit : 8 Amp electronic voltage varrier

( Auto Transformer ).

d. Compact bath with controlling pyrometer. & Relay

e. Digital Model with automatic control

Spare Coking bulb

Spare Set Of Heater

Control bulb for above if required

Sampling device for above

N.B. : 8 test unit can be supplied at an additional cost

FAL-008 CLOUD & POUR POINT APPARATUS.

Cloud & Pour Point apparatus as per IP:15 219, ASTMD : 97, 2500 IS:1448
( P - 10 ) insulated body with glass tube with thermometer.

Single Test Unit

Double Test Unit

Four Test Unit

Six Test Unit

Spare glass jar for above

Spare Metal Jacket

N.B. : Single wall body an also be supplied against specific enquiry.

FAL-010 SMOKE POINT APPARATUS.

Smoke Point Apparatus as per IP:57 & IS : 1448 ( P - 31 )

Spare Candle for above

Spare Wick for above.

FAL-011 FLASH & FIRE POINT APPARATUS

Cleveland Flash & fire point apparatus as per IP:36, ASTMD:92, IS:1448
( without thermometer ) electrically heated model with energy regulator control ( in built )

Sphere Hot Plate

Spare Cut with handle for above

FAL-012 BURNING TEST LAMP.

Burning test lamp as per IP:10 & IS:1448 ( P - 5 )

FAL-013 OIL TESTING CENTRIFUGE.

Oil Testing Centrifuge as per IP:75, ASTMD:96, IS:1448 ( P-41)
complete with stepless speed control speed meter, 0-120 mts timer,
dynamic brake, zero start inter lock switch, rotor head, metal carries,
4 Nos. centrifuge tubes of 100 ml. capacity complete set

FAL-014 ANILINE POINT APPARATUS.

Aniline Point Apparatus as per IP:2, IS:1448 ( P - 3 ) method A
complete with jacket ( with thermometer )

Aniline Point Apparatus as per IP:2, IS:1448 ( P - 3 ) method A
complete with jacket ( with thermometer ) but U tube method as per IP:2-77 electrically head & with electrical stirrer.

Aniline Point Apparatus as per IP:2, IS:1448 ( P - 3 ) method A
complete with jacket ( with thermometer ), but thin film method as per IS:2
method B., IS:1448 ( P - 3 ) ASTMD:611

FAL-015 WATER CONTENT APPARATUS.

a. Water content by Dean & Strak apparatus for estimation of moisture in lubricating
oils as per IP:74 & IS:1448 ( P-40 ) ASTMD:95 & D:244 with 1,2 or 3 CC
Heater for above with energy regulator control.

Heater for above with energy regulator control

Spray tube for above

Spare 2 CC receiver

Spare 10 CC receiver.

b. Hydrogauge to test water content in libes / fuels ( in direct % )

It is portable instrument to get instant results.

FAL-016 DEW POINT APPARATUS.( Laboratory Type )

FAL-017 REID VAPOUR PRESSURE TEST APPARATUS.

Reid Vapour Pressure Test Apparatus as per IS:1448 ( P - 39 )
& IP:69 & ASTMD:323. Bath only for single test with circulation pump & with energy regulator control ( without bomb ).
Reid Vapour Pressure Test Apparatus as per IS:1448 ( P - 39 )
& IP:69 & ASTMD:323. Bath only for single test with circulation pump
& with energy regulator control ( without bomb ) with precision Thermostat.

Reid Vapour Pressure Test Apparatus as per IS:1448 ( P - 39 )
& IP:69 & ASTMD:323. Bath only for single test with circulation pump &
with energy regulator control ( without bomb ) with Imported contact thermometer
& relay Reid Vapour Pressure Test Apparatus as per IS:1448 ( P - 39 )
& IP:69 & ASTMD:323. Bath only for single test with circulation pump
& with energy regulator control ( without bomb ) with 4 tests.

Reid Vapour Pressure Test Apparatus as per IS:1448 ( P - 39 )
& IP:69 & ASTMD:323. Bath only for single test with circulation pump
& with energy regulator control ( without bomb ) with 6 tests.

Vapour Pressure Bomb consisting of one air chamber, one

                        gasoline chamber without cock & gasoline chamber with cock.
Gauge for above any of the range :
0-15 Psi or 0-30 Psi or 0-45 Psi or 0-60 Psi or 0-100 Psi
Spare Gasoline chamber without cock
Spare Gasoline chamber with cock
Mercury Manometer on wooden stand with metal socket ( without mercury )

FAL-018. BOMB CALORIMETER

A. Bomb Calorimeter as per IP:12 with S.S. Bomb ( 18/8 quantity )

complete set, with imported Beckman Thermometer.

B. All as ( A ) with N.T.H. certificate for water equivalent.

C. All as ( A ) but with safety device of excess pressure & bomb

certified by Shree Ran Test House/ National Test House.

D. All as ( A ) but digital model with printer spare imported

Beckmen Thermometer for above.

Spare Bomb

Spare S.S. Crucible

Spare Motor Belt

FAL-019. GREASE & WAX TESTING INSTRUMENTS.

A. Melting Point of Petroleum Wax as per IP:55, IS:4654 & ASTMD:
17 ( with thermometer ).

B. Precision Melting/Boiling point apparatus with accessories Thermometer.

C. Digital Automatic Melting Point Apparatus Readability 1.0 C

FAL-020. DROP POINT OF GREASE.

Drop Point of grease as per IS:1448 ( P-52 )& IP:132 ASTMD: 556
complete with beaker & hand stirrer, single test unit ( without thermometer ).

Spare Aluminum Cover Spare Cup Apparatus complete with electrical heater
with control & motorised stirrer for single test.

FAL-021. DROP POINT OF GREASE.

Drop Point of grease as per IP:31 ( P-52 complete with beaker
& hand stirrer, single test unit ( without thermometer ).
Spare Aluminum Cover
Spare Cup Assembly

Apparatus complete with electrical heater with control &

motorised stirrer for single test.

Oxidation Stability of Grease as per IP:142 & ASTMD:942, IS:1448 ( P-94 )

Price of Bomb made of S.S. without pressure gauge.

Pressure gauge 0-120 lbs/sq. inch for above as per IP:142

Suitable thermostatic bath for 3 bombs ( but without bomb

pressure gauge )

Dish holder made of S.S. for above glass

Glass dish for above.

FAL-022. STANDARD PENETROMETER.

a. Standard Penetrometer as per IS:1448, IP:50 & ASTMD:217,
D:1321 without cone container & weights.

Standard Penetrometer as per IS:1448, IP:50 & ASTMD:217,

                        D:1321 without cone container & weights but with Automatic Timer electrical arrangement.
Centering device for above Brass cone for above.

Aluminum solid cone for above
Weight ( 50 gm or 100 gm )
Grease container 10 cm dia & 10 cm height.

b.   Standard Penetrometer as per IP:50, without cone container
& weights but with arrangement for lowering & raising the arm by geared system.
Special type constant temperature bath for above

FAL-023. GREASE WORKER FOR PENETROMETER.

Grease worker for penetrometer hand operated as per IP:50
IS:1448 & ASTMD:937, 217.

Grease worker for penetrometer hand operated as per IP:50

IS:1448 & ASTMD:937, 217 but, with big handle
( Lever type for mechanical advantage )

FAL-024. ORSAT APPARATUS.

FAL-025. PHYSICAL BALANCES.

i. Capacity : 250 gms

Sensitiveness : 2 - 3 gms.

ii. Capacity : 500 gms

Sensitiveness : 5 - 10 gms.

iii. Capacity : 1 Kg

Sensitiveness : 10 -15 gms.

FAL-026. MUFFLE FURNACE

Working Temperature : 930 ⁰C.

Control : Energy Regular supplied with pyrometer Cr/Al thermocouple.

Size Internal Dimensions

a. 25 x 13 x 13 cm

Rating : 1.6 Kw

b. 30 x 15 x 15 cm

Rating : 2.5 Kw

c. 45 x 23 x 23 cm

Rating : 5.0 Kw

FAL-027. MUFFLE FURNACE

Working Temperature : 1100 ⁰C.

Control : Energy Regular supplied with pyrometer Cr/Al thermocouple.

Size Internal Dimensions

a. 25 x 13 x 13 cm

Rating : 2 Kw

b. 30 x 15 x 15 cm

Rating : 4.5 Kw

c. 45 x 23 x 23 cm

Rating : 5.5 Kw

FAL-028. ELECTRONIC TEMPERATURE CONTROLLER

FAL-029. TWO PEN ELECTRONIC RECORDER.

Input : 4 - 20 mA

Supply : 230 V A.C.

FAL-030. TEMPERATURE CONTROL & INDICATOR UNIT

Unit for furnace 0 - 1200 ⁰C.

a. Max Load : 2 Kw at 230 V A.C.

b. Max Load : 3 Kw at 230 V A.C.

c. Max Load : 9 Kw at 440 V 3 Phase.

FAL-031. HOT PLATE.

Size : Dia - 20 cms.

Control : Built in Thermostatic & Lamp.

Total Rating : 1 Kw.

FAL-032. LABORATORY OVEN ( Electric )

Temperature Range : 5 ⁰C ambient to 250 ⁰C. max.

Accuracy : + 2 ⁰C upto 80 ⁰C.

Control : Thermostatic.

Inner Chamber : Stainsteel.

Size Internal Dimensions.

a. 35 cm x 35 cm x 35 cm.

b. 45 cm x 45 cm x 60 cm.

c. 60 cm x 60 cm x 60 cm.